ROBOTIC TOOL CHANGERS
Robotic tool changer MPS 032
Applications
- Holding/handling
- Vacuum
- Also special applications on request
Areas of operation
- All areas of industry
More information
our Sales Team
Robotic tool change systems from the MPS series are impressive due to their multifunctional technology applications and cover the entire bandwidth of customer-specific applications. The MPS 032 is an extremely flexible solution for small payloads. These automatic tool changers, which have a very compact construction, use integrated media ducts and optional data and energy transmission modules.
Technical data
- Payload up to 32 kg
- Bending moment up to 75 Nm (static), 262.5 Nm (dynamic)
- Torsional moment up to 75 Nm (static), 262.5 Nm (dynamic)
- Locking: pneumatic (additional protection by compound spring on pressure drop)
- Operating air pressure: min. 0.5 MPa – max. 1.0 MPa
- Flange fitting per EN ISO 9409-1-50-4-M6
Coupling modules for media, energy and data transmission
- 7 units M5 integrated media ducts for compressed air and vacuum
- Optional 23-pin electrical connector for data and electrical signal transmission
Storage station
- Flexible and robust storage system
- Standardized single, double or quad storage system
- Customer-specific storage systems on request
- Can be integrated in machine control
- Optionally with additional sensors
Programming support
- Flexible and robust storage system
- Standardized single, double or quad storage system
- Customer-specific storage systems on request
- Can be integrated in machine control
- Optionally with additional sensors