Controllers CS9 EtherCAT I/O Terminals

D 244 430 00 & D 244 431 00 (equivalent to Beckhoff EL6002 & EL6022)

D24443000-D24443100

D 244 430 00 & D 244 431 00 | 2-channel serial interfacesRS232/RS422/RS485, D-sub connection

The D 244 430 00 and D 244 431 00 serial interfaces enable the connection of devices with two RS232 or two RS422/RS485 interfaces. The devices connected to the D 244 430 00 / D 244 431 00 EtherCAT Terminals communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300baud up to 115.2kbaud. The RS232/RS422/RS485 interfaces guarantee high interference immunity through electrically isolated signals. The D 244 431 00 can provide 2x 5V/20mA out of the E-bus supply (electrically isolated, short-circuit-proof) for the supply of external devices.

In conjunction with the TwinCAT Virtual Serial COM Driver, the D 244 430 00 & D 244 431 00 can be used as a normal Windows COM interface.

Technical data

D 244 430 00

Technology

D-sub, 9-pin

Data transfer channels

2

Data transfer rates

300…115,200 baud; default: 9,600 baud, 8 data bits, no parity and one stop bit

Interfaces

2 x RS232

Line impedance

Cable length

max. 15 m

Providing external supply

Power supply

via the E-bus

Distributed clocks

Electrical isolation

500 V (E-bus/signal voltage)

Data buffer

864 bytes receive buffer, 128 bytes transmit buffer

Bit width in the process image

22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status

Configuration

no address setting, configuration via the controller

Current consumption power contacts

Current consumption E-bus

typ. 170 mA

Special features

2 x 5 V/20 mA for external supply (EL6022)

Weight

approx. 55 g

Operating/storage temperature

-25…+60 °C/-40…+85 °C